The given line graph illustrates the production of three forest industry products (pulp, timber and paper) from the year 1980 to 2000.
Some people think that it would be better for large companies and industry to move to regional areas outside large urban areas centres. Do you think the advantages outweigh the disadvantages?
The line graphs below show the production and demand for steel in million tonnes and the number of workers employed in the steel industry in the UK in 2010.
Many claim that the fast-food industry has a negative effect on the environment, eating habits, and families. To what extend do you agree or disagree? Give reasons for your answer and include any relevant examples from your own knowledge and experiences.
The line graph shows the change in production (million tonnes) of three products in the forest industry in a European country.
The diagram illustrates the process that is used to manufacture bricks for the building industry, digger (т40 grid wire cutter day coder cooling chamber drying oven 18 * 72 Are Might 870°C • 1309°C 200°0 • 960°C packaging
Some people think that it would be better for large companies and industry to move to regional areas outside large urban centers. Do you think the advantages outweigh disadvantages?
Some people think that it would be better for large companies and industry to move to regional area outside large urban centers. Do you think advantages outweigh the disadvantages.
International tourism has become a huge industry in the world. Are the problems that international travellers cause greater than the advantages they bring?
many developing countries, there is a problem with declining quality of air and water from both industry and construction. What measures can get to solve this matter?
This diagram shows us the stages of manufacturing bricks, in building industry.
Some people thinks that it would be better for large companies and industry to more to regional areas outside bage weban centers. Do you think the advantages outweigh the disadvantages?
Nowadays, people all over the world are watching foreign films much more than locally produced films. Why? Should government give more financial support to the local film industry? Give reasons for your answer and include any relevant examples from your own knowledge or experience.
This graph shows how many people were employed in the Australian mining industry.
Some industry leaders believe children should learn computer programming in primary school. To what extent you agree or disagree with this situation.
Most of the world’s poor live in countries where tourism is a growing industry. The issue is that tourism does not benefit the poorest. How can the income generated by tourism benefit the poor? And how can we ensure that tourism does not destroy traditional cultures and ways of life? Discuss.
The graph below shows the production of three forest industry products in a European country between, namely timber, pulp, and paper from 1980 to 2000.
The diagram bellow shows the proses by which bricks are manufactured for building industry.
The graph below shows the production of three forest industry products in aEuropean country,namely timber,pulp and paper,from 1980 to 2000.
Some people think that it would be better for larger companies and industry to move to regional areas outside large urban centres. Do you think advantages overweigh disadvantages?
Directions: Read the question below. You will have 30 minutes to plan, write, and revise your essay. Typically an effective essay will contain a minimum of 300 words.
From the following list, which industry has made the biggest technological advancements in the last decade?
▪ Healthcare
▪ Banking
▪ Education
Give reasons or examples to support your opinion.
Tourism is an important industry which has developed the economies of countries in many parts of the world. What effect has tourism had on local communities? Give reasons for your answer and include any relevant examples from your own knowledge or experience.
The bar chart illustrates information about the percentage of three sectors (agriculture,industry,services) of India’s GDP from 1960 to 2000.Units are measured in percent.
The two pie charts illustrate how different industry sectors contributed to the economy of Turkey percentagewise in the years 2000 and 2016.
Many clamlm that the fast-food industry has a negative effect on the environment, eating habits, and families. To what extend do you agree or disagree?
It is not wise for an industry to replace its experienced but old workers with new and young yet inexperienced individuals. To what extent do you agree or disagree?
It is important to use land for human needs such as farming, housing, and industry than to save it for endangered animals. Give reasons for your answer and include any relevant examples from your own knowledge or experience.
1.Nowadays, international tourism is the biggest industry in the world. Some people say that international tourism creates tension rather than understanding between people from different cultures. To what extent do you agree or disagree with this opinion?
The graph below shows the production of three forest industry products in a European country, namely timber, pulp, and paper, from 1980 to 2000. Summarise the information by selecting and reporting the main features, and make Icomparison where relevant.
Active ecotourism and cultural contacr are emerging trends in tourismindustry. What are the reasons behind this ? What are its effect ?
The table displays consumption of water for three sectors in 4 particular nations. Overall, Egypt and Saudi allocated the highest percentage of usage of water in Agriculture while New Zealand and Canada exploit the most water in Industry sector. whereas, home irrigation accounted for the least water for the most countries given, except Canada. Regarding Egypt and Saudi, the consumption of water in Agriculture was the highest number with 82% and 64%, respectively. In addition, the percentage of water usage in Industry constituted 10% and 30%. Meanwhile, the minority of water utilization in home irrigation was below 10%, particularly 8% in Egypt and 6% in Saudi. Concerning to New Zealand and Canada, the majority of water in Industry witnessed in the most usage with 46% and 70%, respectively. Agriculture in New Zealand consumed 44% which was a bit lower than Industry in comparison, 10% was the figure which was seen in Canada, it was the lowest water in all of 3 sectors. However, the level of water in households in Canada was double in comparison with New Zealand with 20% and 10%.
The table below compares the use of water by four different countries. Summarise the information by selecting and reporting the main features, and make comparisons where relevant. White at least 150 words Percentage of total water use by sector Country Domestic use industry Agriculture Egypt 8 10 62 Saudi Arabia 6 30 84 New Zealand 10 48 44 Canada 20 70 10
The graphs show the changes in the UK steel industry between 1970 and 2000. (million tonnes vs thousand). Summarize the information by selecting and reporting the main features, and make comparisons where relevant. Value changes in UK steel industry 1970-2000. Summarize the information by selecting and reporting the main features and make comparisons where relevant.
The process diagram illustrates the manufacturing of bricks for the building industry in seven steps.
Directions: Read the question below. You will have 30 minutes to plan, write, and revise your essay. Typically an effective essay will contain a minimum of 300 words. From the following list, which industry has made the biggest technological advancements in the last decade? ▪Healthcare ▪Banking ▪Education Give reasons or examples to support your opinion.
Thw diagram below shows the process that is used to manufacture bricks for the building industry
The two pie charts below show the percentage of industry sectors contribution to the economy of Turkey in 2000 and 2016
The diagram shows the different stages of brick production for the construction industry. In general, brick production includes 7 steps, starting with excavation and ending with delivery.
The graphs show the changes in the UK industry steel between 1970 and 2000
Some people think that illegal Internet downloads are having a negative effect on the music industry. Others feel that have little or no impact on artists. Discuss both sides and give your own opinion.
The chart below shows the proportion of business making e-commerce purchases by industry in Canada between 2015 and 2019. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.
In many developing countries, there are major problems with the quality of air and water from both industry and construction. What problems has this created? What solutions could be provided to prevent this?
Some people think that it would be better for large companies and industry to move to regional area outside large urban centers. Do you think advantages outweigh the disadvantades
Now a days international tourism is the biggest industry. It creates tension rather than understanding between people from different countries. To what extent do you agree or disagree?
As technological innovation brings about rapid changes and retraining becomes a lifelong necessity, industry should take a more active role in our education. What is your opinion?
The diagram illustrates how steel rods are manufactured in the furniture industry. Summarize the information by selecting and reporting the main features and make comparisons where relevant. 1
In many developing countries, there is a problem with declining quality of water and air from both industry and construction. What measures could be taken to prevent this?
The diagram illustrates the various stages in the manifacture of bricks for the building industry The process requires the manufacture of bricks.
The diagram illustrates the linear process of producing steel rods in the furniture industry.Overall,there are several stages in making steel rods, commencing with raw metals being extracted from the mine, going through mechanical and metallurgical techniques to ensure the shapes,and eventually being ready for quality control. To begin with ,raw material is loaded in the slit after the mining extraction in order to prepare for the melting stage.During this step, those element is melted at high temperatures around 1300 and 1500℃. Once finished,metal which is candescent is refined in a smelting cabin,prior to being poured by a machine into ingots. At the following stage of this process, ingots are linked to a cooling reservoir,which is utilized for lowering down the temperature of the metallic components.Subsequently,cooled metal is casted in the strand form while simultaneously rolled by rollers.Later on, steel rods are heated by a machine, and surface checking takes place afterwards to measure their automation.Finally, after being resized by a cutter, steel rods are applied to a unique ID, ready for the inspection.
Some people think that it would be better for large companies and industry to move to regional areas outside large urban countries. Do you think the advantages outweigh the disadvantages?