The diagram below shows one way of manufacturing ceramic pots.
The picture illustrates how ceramic
pots
are manufactured. Overall
, the process is divided into three main stages: raw materials delivery, clay
preparation, and pot manufacture.
The first stage involves digging the raw materials using an excavator, which is then
delivered to the factory by a dumper truck. At the factory, the soil is crushed in a special machine so that it becomes soft. Next,
the soft soil is mixed with water before being transferred to moulds that give shape to clay
. At this
point, the clay
dries and is moulded into a pot.
Having dried in about four to six hours, the clay
pots
are then
assembled and put into an oven at 1000 degrees celsius to be reinforced in their shape. Next,
the pots
are coloured in a bucket, after which they are sent into the oven again for colour firing. Finally
, coloured pots
are ready to be used.Submitted by tjumagul67 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Linking words: Don't use the same linking words: "next, ".
▼
Introduction: The introduction is missing.
▼
Conclusion: The conclusion is too long.
Introduction: The chart intro is missing.
▼
Introduction: The chart intro is missing.
▼
Vocabulary: Replace the words pots, clay with synonyms.
▼
Vocabulary: Rephrase the word "undefined" in your introduction.
▼
Vocabulary: Only 4 basic words for charts were used.
▼