The diagram illustrates the process of preparing raw materials for ceramic tiles and the
step-by-stepstep
plan of their manufacture.
The first phase is to get a moist slurry by mixing together clay and water in a special machine , Correct your spelling
step-by-step
such
as a mixer and grinder. Linking Words
Secondly
, we put the moisture into a special frame with a filter press where it is removed. Linking Words
Next,
the mixture is put into a spray dryer where the powder comes out. After these steps, we have to put the powder under the tile press to have solid ceramic bricks.
The following steps are very important in the formation of the tiles. Linking Words
Firstly
, we put all of the ceramics into the drying chamber at 100-200 °C for 1 to 3 days. After that, the gazing machine has to apply the coating to each of the pieces. The final stage is that all bricks are put into the kiln at 1000-1250 °C for 20-30 minutes to get sleek ceramic porcelain.Linking Words