The diagram illustrates the process of producing bricks from clay for the building industry.
The diagram shows the stages of bricks being manufactured from clay which can be used in industry construction.
Overall
, as can be seen, there are several steps that are mandatory to do. It is started with the clay required to dig and ends up with delivery to consumers.
Firstly
, the mud is dug with the help of an excavator and the pieces of terra cotta are collected in one place. Then
, the collected mud is selected by a metal grid and replaced with a roller machine. After that, sand and water need to be added which can form a brick by using a wire cutter or mould. In the next process, the slab has to be wiped in the oven for 24-48 hours. Following
this
, at moderate temperature (200-980 degrees Celsius) until high temp (870-1300 degrees Celsius) the cinder block enters the kiln process before it cools through the chamber for 48-72 hours. Furthermore
, the stone that is
strong and solid is ready to be packed and delivered once the step is completed.Submitted by Nabillaa808 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Vocabulary: Rephrase the word "undefined" in your introduction.
▼
Vocabulary: Only 3 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the second paragraph.
▼