The diagram below shows how geothermal energy is used to produce electricity. Summarise the information by selecting and reporting the main features, and make comparisons where relevant. Write at least 150 words.
This
picture illustrates the process of generation of electricity
by the geothermal power plant.
Overall
, The procedure of producing electricity
starts with cold water
going underground and it becomes warmed up by hot rocks and then
pumped up into a condenser and after that, it is converted into electricity
by a generator turbine.
It is clear that
, first of all, there is a cold water
tank which is pumped down to 4.5 km under the surface of the earth by the injection well. Secondly
, it runs through the geothermal zone horizontally until it reaches the production well, while
it is covered by hot water
. Then
, it is pumped up until it goes up to the condenser tank which is placed over the surface.
In the fourth step, this
condensed hot water
changed into steam and it flowed to the generator turbine. In the last
step, it passes through the turbine to produce electricity
energy.Submitted by brightstargalaxy on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Introduction: The chart intro is missing.
▼
Introduction: The chart intro is missing.
▼
Vocabulary: Replace the words electricity, water with synonyms.
▼
Vocabulary: Only 4 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the second paragraph.
▼