The diagram illustrates the process that is used to manufacture bricks for the building industry. Summarize the information by selecting and reporting the main features and make comparisons where relevant.
The diagram gives information about the process how to produce
bricks
for the building industry.
Overall
, it can be clearly seen that there are eight stages to making bricks
, commencing with clay being dug up by the excavator and culminating in the delivery of the brick products by truck.
Look at the process in more detail, first and foremost, the main source of bricks
is clay then
it is taken up by the digger. Subsequently
, the clay is laid out in a metal grid to separate into small particles, while
the results are moved to a conveyor roller. Thereafter
, these figures are added with sand and water then
these materials are undergone in manual mould or machine mould integrated with a wire cutter to produce rectangle bricks
.
Moreover
, the raw bricks
are stacked in a drying oven for 24-48 hours. Interestingly, the next stage is the heating process which requires the bricks
to be heated in a kiln at a moderate temperature (200-980 degrees Celcius) and high temperature (870-1300 degrees Celcius). Then
, the products are cooled in a chamber for 48-72 hours before they are packaged in some columns. Finally
, the bricks
are ready to deliver to the consumer by transporting them with a a
truck.Remove the redundancy
apply
Submitted by mfmakarim55 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Conclusion: The conclusion is too long.
Vocabulary: Replace the words bricks with synonyms.
▼
Vocabulary: Rephrase the word "information" in your introduction.
▼
Vocabulary: Use several vocabularies to present the data in the second paragraph.
▼