The diagram below shows how geothermal energy is used to produce electricity. Summaraise the information by selecting and reporting the main features, and make comparisons where relevant.
The diagram illustrates the electricity manufacturing procedure from Geothermal energy.
Overall
, as it can be seen, there are 5 steps of this
production circle and the water
transforms from liquid to steam through the geothermal process. It sets out with the cold water
that is
collected in the inventory. Moreover
, the water
pumps down to the injection wall and then
continues through the condenser. Ultimately, the electricity current is transmitted through the generator.
As can be observed by the diagram, in the prior level, the stored cold water
pulls down to the chemical injections for bacteria removal. In the next step, the water
transfers through a geothermal zone which is integrated by the hot rocks. Furthermore
, heated water
pumps up to the condenser. Subsequently
, the steam that has been carried out by the condenser will power the Turbine and eventually, the Turbine helps the generator to produce electricity and the flow will be used in houses and factories.Submitted by neginsepahvand on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Vocabulary: Replace the words water with synonyms.
▼
Vocabulary: Only 3 basic words for charts were used.
▼
Vocabulary: The word "diagram" was used 2 times.
▼