The diagram below shows the process by which bricks are manufactured for the building industry. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.
The given diagram explains the manufacturing
process
of bricks
for the construction business.
Overall
, the process
of manufacturing bricks
is divided into seven stages, starting from digging the clay
until the bricks
are delivered to the building industry.
To begin
with, the clay
is collected by a large digger through the digging process
. Then
, the clay
is put onto a metal grid to get into small pieces before it is passed to the roller. Next,
small pieces of clay
are amalgamated with sand and water and proceed into material. Afterwards, the next stage is proceeding the material into the moulding process
of bricks
by using a wire cutter or mould.
Furthermore
, the bricks
are placed into the oven to dry for 24 - 48 hours. Moreover
, after the bricks
get dried, it continues to the kilning stage where the bricks
are put into the kiln. In the kilning stage, the bricks
are kilned with two steps of moderate and high temperature before they move to the cooling process
in the cooling chamber for 48 - 72 hours. Finally
, the bricks
are ready to be packaged and delivered for the construction industry.Submitted by zakiyaartanti19 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Conclusion: The conclusion is too long.
Basic structure: Change the third paragraph.
▼
Vocabulary: Replace the words process, bricks, clay with synonyms.
▼
Vocabulary: Only 6 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the third paragraph.
▼