The diagram below shows how geothermal energy is used to produce electricity.
The picture gives information about how geothermal energy is used to manufacture electricity.
Overall
, the process of producing electricity consists of 5 steps, which can further
be divided into 2 distinct parts. The first part takes place in
underground and the second occurs outside of Change preposition
apply
underground
.
Correct article usage
the underground
To begin
with, the cold water
in this
procedure acts as the starting material, which should be pumped down a distance of 4. 5 km through the injection well. Then
, the temperature of the water
rises when it passes a horizontal geothermal area, where hot rocks play the role of the source of energy. In the subsequent step, the hot water
must be pumped up through the production well, which is as long as the injection well.
However
, its width is more than that of the injection well. Once this
phase has been done, the water
is then
condensed within a chamber, leading to the production of steam. The final step is that the produced steam in the previous stage is utilized in the turbine, making the generation of electricity by the generator feasible.Submitted by yoqubjonovjamshidbek23 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Introduction: The chart intro is missing.
▼
Basic structure: Change the fourth paragraph.
▼
Introduction: The chart intro is missing.
▼
Vocabulary: Replace the words water with synonyms.
▼
Vocabulary: Only 5 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the fourth paragraph.
▼