The diagram below shows a simple system that turn dirty water into clean water. Summarise the information by selecting and reporting the main features, and make comparisions where relevant.
The illustration indicates a process in which dirty
water
is converted into clean one by using certain equipment.
According to
the diagram, it is clear that
the Water
Filter Assembly is made up of a plastic lid, two parts of drums, a linking line between them, and a tap in an exterior shape. Inside a barrel, there are materials to make a drink, but it is not clear what there is in the other.
Looking at the picture more closely, the step begins when ordinary water
that needs to be cleaned is put into the top of a plastic tank, which is composed of three compounds such
as sand, charcoal, and, gravel. At this
point, unclean liquid should go through all of these layers in order, and then
, the fluid gets down gradually. After
this
phase is completed, it passes a narrow tube connected to a storage container below. Finally
, as the clean water
arrives at the storage drum, one can drink filtered water
, using a tap.Submitted by a46615883 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Conclusion: The conclusion is too long.
Introduction: The chart intro is missing.
▼
Introduction: The chart intro is missing.
▼
Vocabulary: Replace the words water with synonyms.
▼
Vocabulary: Only 3 basic words for charts were used.
▼