The diagram below shows how uranium is used in the production of nuclear power. Summarise the information by selecting and reporting the main features, and make comparisons where relevant. You should write at least 150 words.
The following chart depicts some steps of using
uranium
to produce nuclear power.
Overall
, the production of nuclear power consists of six steps, begins with mining uranium
from the earth and ends with it being stored in containers and buried eventually. The steps are divided into two stages. The first stage is the process of generating electricity, while
the second one is the process of storing uranium
.
In detail, the first stage starts with digging uranium
from the earth using a particular mining equipment similar to a pump. After that, uranium
ore that has been collected before,
is converted and enriched to make U-235 Remove the comma
apply
fuel
pellets using a grinder. Subsequently
, U-235 fuel
is brought to generators to power them to create electricity. This
fuel
is predicted to last
for approximately four years.
Furthermore
, the second stage initiates with removing the fuel
that has been used for four years, but sometimes some spent fuel
can be reprocessed and reused. In terms of this
condition, the fuel
is put back into generators
, and the previous step is repeated. Correct article usage
the generators
On the other hand
, spent fuel
that cannot be reprocessed is stored in containers and buried.Submitted by srsdy008 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Basic structure: Change the fourth paragraph.
▼
Vocabulary: Replace the words uranium, fuel with synonyms.
▼
Vocabulary: Only 4 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the fourth paragraph.
▼