The flow diagram illustrates the steps of making raw materials for ceramic tiles, and the stages involved in producing them.
Overall
, we can see that the ceramic Linking Words
tiles
production consists of two phases. Check wording
tile
Initially
, raw materials are prepared following four main steps, followed by the manufacturing stage , which involves Linking Words
Linking Words
also
four distinct steps.
Rephrase
apply
At the first stage
of preparation, raw materials are mixed and ground, adding some clay and water to get a moist slurry. Linking Words
Then
, Linking Words
this
mixture is taken to the filter press to remove moisture. In the third step, the composite passes through a spray dryer to make powder. Linking Words
Finally
, Linking Words
this
powder goes to a press machine to make the tile.
In the manufacturing process, the first step begins with drying the chamber at 100 °C to 200 °C for 1-3 days. Linking Words
Second,
the glazing machine is used to apply Linking Words
coating
. Correct article usage
the coating
Then
, kin is used at 1000 °C to 1250 °C Linking Words
at
20-30 minutes. Change preposition
for
Finally
, we get the end products, namely ceramic tiles.Linking Words