The diagram below shows how rain water is collected and then treated to be used as drinking water in an Australian town. Summarise the information by selecting and reporting the main features and make comparisons where relevant.
The diagram illustrates the process of how rainwater is accumulated and treated to use for drinking purposes in an Australian town.
Overall
, there are four stages of water
treatment i.e. draining, filtering, storing and curing.
To begin
with, when there is rain the rainwater which falls on the rooftop of the houses is collected through pipes in the drainage system which is installed in the lower portion of the houses and it's collected from all the houses and goes to the filter chamber where all the dust and other unwanted particles are filtered. After filtering water
is stored in a huge vessel and passed to water
treatment where water
is treated by adding chemicals to make it fit for consumption. When the cure is done water
is pumped to households through pipes where it can be used for drinking and daily purposes.Submitted by virajmpatel23 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Common mistake: Your writing should be 150-250 words.
Vocabulary: Replace the words water with synonyms.
▼
Vocabulary: Only 3 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the second paragraph.
▼