The diagram below shows how geothermal energy is used to produce electricity. Summarise the information by selecting and reporting the main features, and make comparisons where relevant.
The flowchart provides the process of producing electric power by geothermal energy in five stages.
Overall
, we could say that electricity stems from cold water
to steam
, in order to create power.
In the first stage, cold water
is pumped 4.5 km deep down the ground, which produces the injection successfully. After that, the water
undergoes a high degree of rocks in the geothermal area to the production well, which is at the third stage.
At this
moment, the productive hot water
is pumped up by stress to the huge condenser to store steam
, which is the most important material for generating energy. In the final stages, steam
is transmitted by a tube to the turbine, then
the rolling machine is operated by steam
. Then
, there is a generator combined with the tower using a wire, it creates energy for that structure, which is powered by the turbine and produces electricity.Submitted by Elena on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Introduction: The chart intro is missing.
▼
Basic structure: Change the third paragraph.
▼
Basic structure: Change the fourth paragraph.
▼
Introduction: The chart intro is missing.
▼
Vocabulary: Replace the words water, steam with synonyms.
▼
Vocabulary: Only 1 basic words for charts were used.
▼
Vocabulary: Use several vocabularies to present the data in the second paragraph.
▼
Vocabulary: Use several vocabularies to present the data in the third paragraph.
▼
Vocabulary: Use several vocabularies to present the data in the fourth paragraph.
▼