The diagram below shows the stages and equipment used in the cement-making process, and how cement is used to produce concrete for building purposes. Summarize and information by selecting and reporting the main features and make comparisons where relevant.

The given photograph illustrates the process of producing cement and its purposes in construction.

Overall

Linking Words

, it can be observed that the adhesive cement-making method begins with limestone and clay being crushed and ends with bagged plaster. it should

also

Linking Words

be noted how the adhesive is mixed with other ingredients to create concrete which is used for building The start of the whole process lay on limestone and clay being crushed and passed through a mixer in order to mix the additives together.

Next,

Linking Words

the mix ed powder is moved into the rotating heater which heated the powder at a sustainable temperature . After that, the heated powder is ground to make the final product of adhesive, which is

then

Linking Words

bagged and ready for consumption The remaining graphic involves, adhesive mixed with other ingredients

such

Linking Words

as water, gravel , and sand in a concrete mixer with a perfect ratio of 15% of plaster , 10% of water , gravel accounted for 50% and sand made up for 25%.

Then

Linking Words

the additives are mixed well together to produce concrete, which is used for construction purposes