The diagram below shows how geothermal energy is used to produce electricity. Summarise the information by selecting and reporting the main features, and make comparisons were relevant.
The given process illustrates details of
electricity
production by the use of geothermal in five steps. Overall
, this
process starts with pumping cold water
down then
after hitting, this
water
comes up to the condenser and it turns into steam
for producing electricity
.
Once cold water
is pumped up by 4.5 kilometres underground in a good injection system that links to the geothermal zone, the geothermal zone makes the water
hot with hot rocks made of stone. In the Next stage of production well pumped hot water
is in the condenser which makes hot water
to steam
, following
this
steam
enters the turbine by rotating the steam
in a turbine generator powered by the turbine and produces electricity
current. In the last
stage, electricity
power reaches the pylon and end users. This
process shows the geothermal power plant that some steps are done underground and some other steps are done on the groundSubmitted by TUTOO on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Introduction: The chart intro is missing.
▼
Basic structure: Write more paragraphs.
▼
Basic structure: Add more body paragraphs.
▼
Introduction: The chart intro is missing.
▼
Basic structure: Write more paragraphs.
▼
Vocabulary: Replace the words electricity, water, steam with synonyms.
▼
Vocabulary: Only 4 basic words for charts were used.
▼