The diagram shows how rainwater is collected for the use of drinking water in an Australian town. Summarise the information by selecting and reporting the main features and make comparisons where relevant
The purpose of
this
report is to provide data pertaining to the steps involved in collecting rainwater for the use of drinking water
in an Australian town.
Overall
, this
process consisted of various phases, commencing with rainwater is
falling on the roof and culminating in drinking Unnecessary verb
apply
water
.
The multi-step process starts when it is raining outside houses and then
falling on their roof. Subsequently
, the water
will be run inside the drain, after which, at this
point , the water
is filtered. In the next step, the water
is stored in order to prepare for the subsequent stage. Following
this
, the storage water
then
goes to the treatment phase by which harmful bacteria can be eliminated.
In the next step, the water
treatment moves to the chemical stage. Once this
phase has been completed, the population in Australian town
can use the Fix the agreement mistake
towns
water
in their daily life.Submitted by gianglam.vn92 on
Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Writing9 with appropriate and specific direction to the original content.
Introduction: The introduction is missing.
▼
Introduction: The chart intro is missing.
▼
Common mistake: Your writing should be 150-250 words.
Introduction: The chart intro is missing.
▼
Vocabulary: Replace the words water with synonyms.
▼
Vocabulary: Only 4 basic words for charts were used.
▼
Vocabulary: The word "fall" was used 2 times.
▼